OXVA VPrime Replacement Pods

OXVA VPrime Pods (XL and VPrime 2)

OXVA VPrime pods are refillable replacement pods for the VPrime kit and the VPrime 2 kit. The coil is sealed inside every pod and you side-fill through a silicone port. These are refillable VPrime pods, not prefilled.

We stock two generations of the brand's pods.

• The OXVA VPrime 5ml pod (XL): carries UniTech 2.0 dual mesh across four resistances
• The newer 6ml VPrime 2 pod: moves to UniTech 3.0 in 0.4Ω and 0.6Ω.

The 6ml pod fits the original VPrime as well as the VPrime 2, so it is an upgrade rather than a replacement if you already own the first kit. Both are sold two to a pack.

Between them, the resistances cover everything from tight MTL draws on the 0.8Ω through to full DTL at 0.2Ω. The lower resistances suit shortfill e-liquids while the 0.8Ω pairs nicely with nic salts.

Key Features

• Dual mesh coils two mesh strips per pod for even heating
• 5ml XL or 6ml VPrime 2 the 6ml pod holds the most e-liquid of the range
• Both pods fit both kits. The 6ml VPrime 2 pod works in the original VPrime and vice versa
• Four resistances: 0.2Ω, 0.4Ω, 0.6Ω and 0.8Ω on the XL, 0.4Ω and 0.6Ω on the VPrime 2
• DTL, RDL and MTL full range of vaping styles covered
• Side-fill: pop the silicone plug, fill, done
• Leak protection triple silicone seals and a bottom-mounted coil
• Two to a pack: two pods per box on both generations

For other cartridges, see the NeXlim pods or the full OXVA pods range.

UniTech 2.0 Dual Mesh

OXVA put two mesh strips inside each VPrime 5ml pod instead of the usual single coil. Both heat at the same time so more of the cotton gets used evenly. The result is stronger flavour from the first fill, and the VPrime coils hold up longer because no single spot takes all the heat.

OXVA's own figures say 50% better flavour and 30% longer coil life compared to their standard single mesh pods. The coil is sealed in, so there is nothing separate to swap. When flavour starts to fade, you change the whole pod.

OXVA VPrime 2 Pods (6ml Dual Mesh)

The VPrime 2 pod is the newer of the two. OXVA label the box VPrime Dual Mesh Cartridge, two pods to a pack at 6ml each, which is the largest capacity in the VPrime range. It is not limited to the newer kit, it fits the original VPrime too.

Worth knowing before you order. The VPrime 2 kit comes with 2ml pods in the box, so the 6ml is the step up you buy separately once those are done. Same coil, same fit, three times the liquid.

The step up is UniTech 3.0. The airflow path is U-shaped and the vapour chamber is larger, and OXVA put the gain at 200% better flavour, 200% longer pod life and 120% better leak protection against the previous generation. Those are the manufacturer's figures rather than ours.

Only two resistances are made, 0.4Ω and 0.6Ω, both aimed at restricted lung vaping. If you want a tight MTL draw or full DTL at 0.2Ω, that is still the 5ml XL pod above.

The 6ml capacity is the headline change on this pod. Both resistances use the same UniTech 3.0 coil, so the choice between them is draw and wattage only.

Resistance Options

Here is how the two generations break down side by side, with the wattage each pod is happiest at and the e-liquid that suits it.

If you are after a tight cigarette-style draw with 20mg nic salt, the 0.8Ω XL is the one. The 0.2Ω XL sits at the other end, big clouds and open airflow, and it wants a high VG shortfill to keep up at 60W. The two VPrime 2 pods land in the middle on both counts, with more liquid behind them. Our nic salt strengths guide covers the difference between 5mg, 10mg and 20mg if you are deciding on a strength.

What's in the box?

• 2x OXVA VPrime Pods