Geekvape Z Series Replacement Coils

Geekvape Z Coils

The Geekvape Z coils are the XM Boost version replacement coils for the Aegis Legend range, T200, Z200, and all Z Sub-Ohm tanks (previously called the Zeus tank). Three resistances at 0.15Ω, 0.2Ω, and 0.4Ω cover DTL vaping from 50W up to 85W. All three use Kanthal mesh and push straight in with no threading.

The XM Boost versions last roughly twice as long as the original Z coils, around 50–60ml of e-liquid per coil. They work with high VG shortfills and 70/30 e-liquids. Not built for nic salts or 50/50. Each pack has five coils.

Key Features

• 3 Resistances 0.15Ω (70–85W), 0.2Ω (70–80W), 0.4Ω (50–60W)
• XM Boost Version lasts ~2x longer than original Z coils
• Kanthal Mesh even heating, no hotspots
• Push-Fit pull old coil out, push new one in
• Fits Legend 2, 3, 5 plus T200, Z200, Solo 2, Solo 3, and all Z Sub-Ohm tanks
• DTL Vaping 50–85W with high VG and shortfills
• Pack of 5 all resistances sold in five-packs

Z Coil Resistances

The 0.15Ω and 0.2Ω are close in wattage and both suit full DTL vaping. The main difference is the 0.15Ω pulls slightly more power and runs a touch warmer. The 0.4Ω drops the wattage down and stretches your battery further while still giving a solid DTL draw.

All three work best with 70/30 or higher VG e-liquids. Thinner 50/50 liquids can leak at these wattages through the mesh wicking.

Z Series Coil Compatibility

These coils fit a long list of Geekvape kits and tanks. If yours is on the list, Z coils are the ones you need.

Aegis Legend Kits

• Aegis Legend 2 (L200)
• Aegis Legend 3
• Aegis Legend 5

Other Compatible Kits

• Aegis Solo 2 (S100)
• Aegis Solo 3
• T200
• Z200
• Obelisk 120 FC
• Obelisk 200

Z Sub-Ohm Tanks

• Z Sub-Ohm Tank (the original Zeus tank)
• Z Sub-Ohm 2021
• Z Sub-Ohm SE
• Z Sub-Ohm Tank 5
• Z Fli Tank
• Z Fli Tank 2

NOT Compatible

• Z Max Tank uses M Series coils, not Z coils
• Z Nano / Z Nano 2 / Z Nano MTL use B Series coils

If you're searching for "Zeus coils" or "Zeus tank coils," Z Series is what you need. Geekvape renamed the Zeus range to Z Series but the coils are the same platform.

XM Boost vs Original Z Coils

The Z XM Boost coils replaced the older Z Series coils. The XM versions last around twice as long, roughly 50–60ml of e-liquid per coil compared to 25–30ml on the originals. The mesh and cotton construction is improved, so flavour holds up better towards the end of the coil's life.

If you've been using original Z coils, XM Boost are the direct replacement. Same push-fit, same resistances, same tanks. They just last longer.

Push-Fit Installation

Pull the old coil straight out of the tank base. Press the new Z coil in until it clicks into place. No threading or screwing needed.

Prime every new coil before you vape on it. Drop e-liquid onto the cotton through the top and side ports, fill the tank, and wait three to five minutes before your first draw.

Geekvape Z Coils Specifications

What's in the Box?

• 5x Geekvape Z Coils (chosen resistance)